SINGLE-ROW BEARINGS

Contact Now

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:

Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance.As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

NSK  LM522546/LM522510 SINGLE-ROW BEARINGS

50700 N 6300 rpm
80.000 mm 22.00 mm

NSK  EE128102/128160 SINGLE-ROW BEARINGS

1 in 33.337 mm
28.575 mm 1/4 NPT

NSK  R600-4 SINGLE-ROW BEARINGS

0.3 mm 10 mm
0.0052 kg 12.5 mm

NSK  LL788349/LL788310 SINGLE-ROW BEARINGS

345000 N 2000 rpm
150.000 mm 320.0000 mm

NSK  38880/38820 SINGLE-ROW BEARINGS

80.000 mm No Shield, no Seal,
182000 N 170.0000 mm

NSK  HR32956J SINGLE-ROW BEARINGS

4380 lbf 5.4375 in
1 3/16 in 2.0625 in

NSK  EE153050/153100 SINGLE-ROW BEARINGS

3 mm 155.75 mm
14 mm 1.25 kg

NSK  EE107060/107105 SINGLE-ROW BEARINGS

340000 N 56.00 mm
6700 rpm 216000 N

NSK  HH953749/HH953710 SINGLE-ROW BEARINGS

1500 rpm 390000 N
750 rpm 56.00 mm

NSK  BJM738249/JM738210 SINGLE-ROW BEARINGS

20 mm 72 kN
8.8 kN 65 mm

NSK  L865547/L865512 SINGLE-ROW BEARINGS

PLC 512-71   2950  
13965 kN 2232.010 kg

NSK  HH228349/HH228310 SINGLE-ROW BEARINGS

317.5 mm EPR 16
279.4 mm 539.75 mm
2/15